Open Pit Design - Inter-Ramp Angles and Volume Changes from Bench Geometry

Notes on Open Pit Design - Inter-Ramp Angles and Volume Changes from Bench Geometry

• This tool determines the inter-ramp angle for a specified bench geometry and the approximate change (%) in excavation volume due to a change in inter-ramp angle.
• All angles are specified in degrees.
• Bench dimensions are specified in metric or imperial units.

Tool developed and sponsored by Zostrich Geotechnical.

Tool Parameters

Values displayed with a may be changed ... click on a value to display an entry form ... or use the arrows right of a value to select from a list.

Tool Behaviour

This tool exhibits spreadsheet-like behaviour ... change a value and related values are re-calculated automatically.

• Mineral Deposit Evaluation
• Mine Planning 2 - Operations
• Principles and Practice of Ethics for Professionals in Mining
• Mining 101 - A Non-Technical Primer for Mining
• Practical Geostatistics
• Mine Planning - Strategy
• Mining 101
• Mobile Equipment Life Cycle Management
• Mineral Resource Estimation
• Mine Planning - Strategy
• Mining 101
• Heap Leach Facility Design, Construction, Operation, and Closure
• Practical Geostatistics
• Uptime for the Down Times - Strategies for Excellence in Maintenance Management
• Mineral Resource Estimation
• Mineral Resource Estimation
• Underground Mine Backfill 1 - Introduction
• Underground Mine Backfill 2 - Slurry, Paste, and Rock Fills
• Blast Design and Assessment for Surface Mines and Quarries
• Introduction to Block Caving
• The Business Case for Cave Mining
• Optimizing Overburden Placement in Surface Mining of Coal
• Mining Equipment Product Support Contracts
• Haul Road Design and Operational Benchmarking
• Mobile Equipment Life Cycle Costing
• Heap Leach Pads
• Heap Leach Design
• Maintenance Management
• An Introduction to Mining and Mineral Processing
• Introduction à l’exploitation minière et au traitement du minerai
• Уул уурхай ба эрдсийн баяжуулалтын үндэс
• Introdução a Mineração e Processamento Mineral
• Mining Explained
• Mine Planning 1 - Strategy
• Mine Planning 2 - Operations
• Mine Planning 3 - Optimization
• Conventional Methods of Resource / Reserve Estimation
• Design and Application of Sublevel Stoping Methods
• 360° Introduction to the Mining Industry
• Underground Mining Methods and Equipment
• Underground Mine Environment 1: Ventilation and Mine Services
• Underground Mine Environment 2: Environmental Contaminants
• Underground Mining Practice
• Uptime: Strategies for Excellence in Maintenance Management
• Mine Ventilation 1 - Introduction
• Mine Ventilation 2 - Hazard Awareness
• Mine Ventilation 3 - Design Basics
• Mine Ventilation 4 - Advanced Design
• Mine Ventilation 5 - Operations
• Maintenance and Performance Optimization
• Mining 101
• Geotechnical Inputs to Block Cave Mining
• Heap Leach Facilities 101
• Energy Conservation through Mine-Mill Integration
• Mine-Mill Integration - The Business Case
• Mobile Fleet Risk Management
• Resource Business Optimization
• Uptime - Strategies for Excellence in Maintenance Management
• Uptime - Strategies for Excellence in Maintenance Management

• Open Pit Design - Inter-Ramp Angles and Volume Changes from Bench Geometry
• Bench Blasting - Peak Particle Velocity (PPV) for Assessment of Structural Damage Potential
• Bench Blasting - Blast Parameters for a Specified Vibration Threshold
• Unit Conversions for the Geosciences
• Decision Support System
• Dictionary of Mining, Mineral and Related Terms
• Mining Method Selection
• Blasting Safety - Peak Particle Velocity Thresholds